The Laser Tool Setter 35.60-LTS is a high-end system for
dynamic, non-contact tool measurement allowing automatic
checks for tool wear or breakage. A focussed laser provides
accurate measurement on any tool geometry for tools as small
as 0.008mm (0.0003"). Integrated cleaning jets creating a supersonic
airstream clean the tool's cutting edge during measurement ensuring
reliable results even in harsh environments. And durable stainless
steel construction and sophisticated laser technology guarantee
dependable results with the utmost precision in any production
scenario. Simple mounting, rapid alignment, and easy maintenance
ensure that the tool setter is always ready to use when you need it.













Precision and process reliability
 Precision measurements regardless of
geometry and tool dimensions
 Uncertainty in measurement due to varying
thermal expansion of materials is ruled out
 Precision measurements for tools larger
than 0.008 mm (0.0003'')
 Supersonic air jets significantly reduce
measurement errors from dirt on the tool
 Software algorithms to eliminate the effects
of coolant drops
 No interference from ambient lights

Sturdy design
 Compact, stainless steel housing
 Laser optics protected using motor-operated
shutter unit
 Air curtain prevents dirt particles entering
the device
 Measurement system sealed according to
IP68 standard

Simple setup
 Simple mounting and setup without special
pneumatic unit
 No special, accurate alignment of the laser
unit required
 Simple orientation and mechanical definition
of the focal point
 No external activation of the shutter unit
and air curtain

Operation suitable for the workshop
 Simple and reliable calibration and set-up
of the laser unit
 Maintenance of the laser optics without tools,
removable shutter unit
 Easy to regulate, accessible air curtain
 Measurement of very short tools possible

Applications and measuring routines
 Dynamic, precision measurement of length
and diameter for almost any tool from
Ø >0.008 mm (0.0003")
 Measurement of the cutting edge geometry
at nominal speed
 Length compensation of dynamic changes
in tool position
 Correction of tool length in case of thermal
change and thermal drift of the spindle or
machine axes
 Diameter compensation for dynamic
changes in the rotational diameter of a tool
 Detection and compensation of tool wear
 Monitoring of run-out, tool change and
clamping errors
 Tool breakage detection
Tools are measured in the focused
measuring point
Highly effective tool cleaning with
supersonic air jets
Large tolerance in axis parallelism
permits simple alignment
Positioning slot and calibration pin
enable fast alignment
The shutter unit can be removed
manually for cleaning the optics
Print/PDF Quotation request
Top
News
PC-DMIS NC Gage
Software
28.09.2009
Laser Tool Setter
35.60-LTS
20.09.2009
Temperature Probe
20.44-MULTI
02.09.2009
Radio-wave Receiver
95.40-RX/TX/°C
03.08.2009
Infrared Tool Setter
35.70-OTS
23.07.2009
3D Form Inspect
Floating License
21.04.2009
News archive
Application reports
Case Study
Wiener Linien
03.05.2010
Case Study
quattro-form
26.04.2010
Case Study
Geberit
02.02.2010
Gerg Modell- und
Formenbau
18.12.2009
Juraform
25.11.2009
Hofmann
29.10.2009
Cosmac
17.08.2009
Menegazzi
30.07.2009
Paul Horn
30.07.2009
FAMIP
France
25.05.2009
Volkswagen
Germany
29.04.2009
LARO NC
Technik GmbH
14.02.2009
Application reports
archive