The compact radio-wave receiver 95.40-RX/TX/°C communicates with all m&h radio-wave probes, including the temperature probe. It is sealed to IP68 and can be mounted anywhere in the machining area with ease. Measurement and temperature data are transmitted using the high-penetration transmitting frequency of 433 MHz. While in operation, the environment is continuously checked for interference from transmitters (SCS). Corrupted channels are blocked, non-corrupted displayed for use making it easy to adapt to varying radio conditions.










Design
 Slim, compact design
 Designed for mounting in the working area
of the machine
 All-stainless steel housing
 Sealing according to IP68 standardh

Operational and process reliability
 Reception of measuring signals and
workpiece temperature data
 Reliable data reception through protected
electronics, even in case of machine vibration
 Highest operational reliability through
transmission protocol
 Permanent check of radio channels for
interfering signals
 Automatic blocking of channels by
Self Channel Select (SCS)
 64 radio channels in protected frequency
range, proven worldwide

Universal application possibilities
 Suitable for turning/milling centres, vertical
turning machines, large milling machines and
machining centres
 Use on multi-axis machines with swivelling
head possible
 Easy mounting and optimal positioning
thanks to vertical and horizontal holders
 Flexible antenna swivels through 355° for
easy adaptation to machine conditions
 Simple retrofit through automatic adjustment
to the clamping area of the machine

Operation suitable for the workshop
 LED status display visible from any position
in the working area
 Simple channel setting using “Select
Channel” button
 Digital channel display on receiver and probe
 Antenna exchange without tools
LED status display visible from any
position in the working area
Set radio channel easily using the
"Select Channel" button
Positioning in the working area by
mounting with the horizontal holder
Mounting with vertical holder
Print/PDF Quotation request
Back to the overview Top
News
PC-DMIS NC Gage
Software
28.09.2009
Laser Tool Setter
35.60-LTS
20.09.2009
Temperature Probe
20.44-MULTI
02.09.2009
Radio-wave Receiver
95.40-RX/TX/°C
03.08.2009
Infrared Tool Setter
35.70-OTS
23.07.2009
3D Form Inspect
Floating License
21.04.2009
News archive
Application reports
Case Study
Wiener Linien
03.05.2010
Case Study
quattro-form
26.04.2010
Case Study
Geberit
02.02.2010
Gerg Modell- und
Formenbau
18.12.2009
Juraform
25.11.2009
Hofmann
29.10.2009
Cosmac
17.08.2009
Menegazzi
30.07.2009
Paul Horn
30.07.2009
FAMIP
France
25.05.2009
Volkswagen
Germany
29.04.2009
LARO NC
Technik GmbH
14.02.2009
Application reports
archive