m&h radio-wave probes are touch trigger probes. When approaching a workpiece surface, the stylus deflects and a trigger signal is transmitted to the receiver by radio wave. This receiver converts the radio waves to an electrical signal sent to the control.Interference free signal transmission between probe and receiver is absolutely vital for process-reliable measuring on machine tools. Radio transmission is made in the 433 MHz frequency band being internationally approved and providing particularly high penetration. 64 channels can be easily adjusted on the digital display both on the probe and receiver. The patented SCS (Self Channel Select) technology of the microprocessor-controlled receiver responds to interference signals by continuously checking the environment. The receiver will block corrupted frequencies from further use and will suggest the best alternative frequency. Combining these two technologies ensures process-reliable radio transmission.
Modular construction - Touch probe can be extended almost without limit
- Slim standard extensions in four different lengths can be combined
- For measuring tasks inside the workpiece
- Highest precision: measuring mechanism close to measuring point
Trigger force freely adjustable
- Measuring of thin sections with minimal measuring force
- Measuring of soft materials
- Measuring with large cross probes at max. measuring force
- No false signals during acceleration
- Easy adjustment from the front without dismantling (patented)
Performance and process reliability
- Protected frequency range, proven worldwide
- Safe signal transmission through transmission protocol
- 64 channels freely adjustable
- Optimum receiving technology through multiple sampling
- Reliability from mechanical activation
Sturdy and protected
- Screw-in break shaft
- Double membrane sealing
- Chip guard shield
- Probe housing made of stainless steel
- Water-proof probe sealing using IP68 standard
Operation suitable for the workshop
- Easy channel adjustment at the push of a button
- Digital channel display
- Common, standard battery (Type 9 V block)
- Quick battery replacement without tools
- Easy exchange of the stylus
- Easy lateral run out adjustment
Print
